|
|
 |
Flap Discs
Premium closed coat A or ZA abrasive flap discs used. Backing is made from non-flexible consumable fiberglass or plastic with a conical (T-29) face, for ease of use, or flat (T-27) face. Standard and special sizes, available with or without hubs. Used on a right angle grinder for stock removal, grinding and blending of welds, castings and other metal finishing.
| Flap disc |
|
|
OD×ID(mm) |
ABRASIVE |
GRIT |
Other |
|
50/75 |
A S.C ZA |
16#-400# |
Hub flap disc is also available |
|
100×16 |
|
115×22 |
|
125×22 |
|
150×22 |
|
180×22 |
|
230×22 |
Flap Wheels
These versatile wheels are designed in a variety of dimensions and different configurations. In general other than the grit of the wheel, the finish will be in direct relationship to the cutting speed of the fan grinder. To achieve maximum life out of the tool it is important not to apply to much pressure on the tool.
| Flap wheels mounted |
 |
OD×ID(mm) |
ABRASIVE |
GRIT |
Shank |
RPM |
|
20×10 20×15 |
A S.C ZA |
40#--800# |
3 or 6 |
Recommend 50m/s |
|
25×10 25×15 |
|
30×10 30×15 30×20 |
|
40×10 40×15 40×20 |
|
50×10 50×15 50×20 |
|
60×15 60×20
|
|
60×30 60×40 |
|
80×15 80×20 80×30 |
|
80×40 80×50 |
| Flap wheels |
|
|
OD(mm) |
T(mm) |
ABRASIVE |
GRIT |
Other |
|
100 |
30,50 |
A ZA S.C |
24#-400# |
Recommend 50m/s |
|
150 |
25,30,50 |
|
200 |
25,30,50,75 |
|
250 |
25,30,50,75,100 |
|
300 |
30,50,75,100 |
|
350 |
30,50,75,100 |
|
400 |
30,50,75,100 |
Other cloth paper tools
|
Cloth Bands: |
Cartridge Rolls:. |
|
Two-Ply spiral cloth tubes coated with Aluminum Oxide grain for edge finishing, curves and corners. |
A dense winding of aluminum oxide, resin bond, cloth abrasive. Shaped and glued into a straight rolll |
|
|
|
|
|
